Solid State Relay

More Details
Solid State Relay
-General specification
  1. High Rellability by S. M. T. & TQC. 
      (Surface Mounting Technology)
  2. High isolation over than 50MW/500VDC.
  3. High dielectric over than 2.5KV.
  4. Low enable current less than 7.5mA / 12 VDC  
      CMOS I.C. or TTL compatible.
  5. Low EMI / EFI & surge by zero cross trigger method.
  6. High surge current duration over 10 times of rated 
      current / one cycle.
  7. High surge voltage duration by snubber circuit.
-Purchase guide:
  Terminal type: EX: 
SSR
 - 
40
 
D
A
 - 
H
                              
(1)     (2) (3)    (4)
  PCB type: EX: 
SSR
 - 
P
 
03
 - 
D
 
A
                       
(1)    (2)(3)   (4)(5)
Terminal Type
(1) Product
     SSR = Single Phase Solid State Relay
     TSR: Three Phase Solid State Relay
(2) Output Current
     10 = 10A              25 = 25A                 40 = 40A 
     50 = 50A              75 = 75A
(3) Input Voltage
     D = DC 3W ~ 32V (ON / OFF)
     A = AC 80 ~ 250V (ON / OFF)
     L= 4 ~20 mA (linear)
     V = Variable resister
(4) Output Voltage
     A = AC Voltage        D = DC voltage
(5) Output Voltage Range
     H = High voltage type (90 ~ 480 VAC)
     Non = Standard type (24 ~ 380 VAC)
PCB type
(1) Product
     SSR = Single Phase Solid State Relay
(2) Mounting Method
     PCB: PCB type
(3) Output Current
     03 = 3A         05 = 5A
(4) Input Method
     D = DC voltage
(5) Output Voltage
     D = DC 5 ~ 60V
     A  = AC 24 ~ 280V